Hydro jetting is a common plumbing method used to remove dirt and other pollutants from surfaces and pipe blockages. The term hydro jetting is normally unfamiliar to many, but the technique has immense benefits not only to your pipes but also to your entire plumbing system.

 we offer the most professional services to ensure your plumbing system serves you efficiently. In this article, we help you to understand what hydro jetting is, how it works and why you should consider it for your home.

Hydro jetting is an efficient non-invasive plumbing method that clears pipes by removing dirt and blockages. This process entails using high-pressure water jets to remove clogs, dirt, and buildup from a plumbing system. Before the hydro jetting, plumbers used the rodding method to clear all accumulated materials and dirt from plumbing systems. However, hydro jetting is now becoming popular among plumbers. 

Similar to other technical processes, you will need to brief your plumber about your system for them to recommend a suitable solution. Before the hydro jetting process can be conducted, a professional plumber should inspect and evaluate your system, helping them identify the right place to connect the hose to start pumping water. 

 is a process that is necessary when the water system is clogged with severe recurring clogs. The inner part of plumbing pipes accumulates dirt, minerals, and grease with time and clogs, resulting in slow water drainage. Clogging may lead to sewer backups and other plumbing problems if not resolved. 

This process begins with the examination and review of your plumbing system by a 

 to analyze the damage. The process is then started with the plumber inserting the jetting hose into your sewer, household, or septic plumbing, to create the right water pressure in your pipes. 

This created pressure is important in unclogging the system. However, ensure your drains and pipes can handle the pressure. Water pressure levels can be adjusted depending on the state of your plumbing system, with 35,000 psi as the maximum pressure. 

Once the pressure has been created, it forces all dirt and material clogging the pipes to flow down through the sewer, leaving the plumbing system and pipes clean of dirt, including grease and other buildups. There are also different cleaning methods, such as plumbing snakes and plungers. However, hydro jetting is safer and more effective. 

What Can Be Removed With Hydro Jetting? 

Hydro jetting effectively removes sand, silt, grease, and hair clogs that stick on the pipe walls. Hydro jetting should be conducted regularly in places such as restaurants to keep the plumbing system free from accumulating grease and food particles. 

When Do You Know You Need Hydro Jetting? 

You know you need the hydro jetting process if you note the following about your plumbing system: 

Contact your local plumber for a system review and for them to guide you on the necessary actions for your system. For example, it might cost you a sewer line camera inspection, but that cost cannot be compared to the cost you could incur if your system requires complete replacement due to unresolved clogging. 

Contact Moon Valley Plumbing Today for Hydro Jetting Services in Phoenix 

Do you need hydro jetting services in Phoenix, Arizona? Then, Moon Valley Plumbing and Rooter is your perfect destination. Our professional team will ensure your plumbing problem is solved and leave it operating efficiently. 

for inquiries and to schedule an appointment with our experienced plumbers. 

What is Hydro Jetting 

Comfort in your home requires an excellent plumbing system. Most plumbing systems consist of water heaters and water heating tanks. A cold shower on a chilly morning can be uncomfortable! You always need a functional water heater.

Water heaters are constantly exposed to water and are susceptible to rust and corrosion. The anode rod is the key to the lifespan and success of your water heater from installation to replacement. However, the life expectancy of your anode rod is often shorter than the water heater itself so you need to check it regularly and replace it as needed.

If your home doesn't have a traditional water heater tank, you probably haven't heard of an anode rod. But if you do, you should learn about them. Moon Valley Plumbing explains the essentials of anode rods.

An anode rod is a long metal rod formed from magnesium, aluminum, or an alloy of aluminum and zinc around a steel wire, preventing corrosion in your water heater. The rod is inserted into the water storage tank, where it degrades, protecting the tank lining from rusting. The anode rod extends the life of your water heater and maintains the quality of the hot water produced. The anode extends the lifespan of your water tank by attracting sediments which would cause corrosion on the tank's wall.

Water heaters are prone to rust, which can shorten their lifespan. An anode helps to prevent rust which lengthens the lifespan and performance of your water heater. It is also referred to as a sacrificial anode and degrades to corrosion, protecting your tank lining from rusting. As it erodes, electrons are released into the tank, which protects the tank's lining and prevents corrosion.

Water heating accounts for about 20% of your home's energy use. A malfunctioning water heater strains to produce hot water, increasing energy costs, and household expenses. An anode rod attracts corrosive elements like sediments and minerals, thus protecting the water heater and improving its performance and efficiency. Water heaters are vulnerable to corrosion and regular inspections of the anode rod are important to improve the water heater's lifespan.

How often should the Anode Rod be replaced?

Household consumption of hot water, hardness or softness of the water, water system maintenance, and the type of anode rod used are some factors that determine the lifespan of the anode. For instance, water acidity and heat degrade the anode rod faster.

The type of material your anode rod is made of influences its lifespan. Anode rods made of magnesium corrode faster, especially in hard water conditions. Thus, magnesium anode rods should be checked annually and replaced after a few years. 

Aluminum rods, however, are longer-lasting and more affordable than magnesium ones so they may take longer to be replaced. These should be checked annually or biannually and replaced by a trusted plumbing company after an extended period.

Lastly, there's the electrical or non-sacrificial anode rod, which does not undergo corrosion. It sends electrical impulses into the water heater to protect it from rusting. They are expensive but provide the longest-lasting option for the water heater.

Visual inspection of your anode rod is necessary to check on the health of the rod. Draw samples of both hot and cold water from the water tank to check for any signs of rust. Flushing and draining your water heater storage tank as per your manufacturer's recommendations will protect the tank from corrosion.

Signs that your water heater is corroded include: a knocking sound from the heater, fluctuation of water temperatures, leaks from the heater, production of little hot water, or the foul smell of a rotten egg.

The anode rod is the champion of preserving the health of your water heater. Severe corrosion of the anode rod may require replacement to extend the lifespan of your water heater. Extensive expert knowledge of plumbing is necessary to avoid damaging the newly acquired rod.

Is it Time to Replace Your Anode Rod? Contact Moon Valley Plumbing Today!

Do you have an older water heater tank? Is your water not warming up? Moon Valley Plumbing offers two decades of experience in water heaters, home inspections, and other plumbing services.

Whether replacing an existing part or installing a brand new unit, our plumbers can handle any job.

Moon Valley Plumbing is a reliable source of top-quality products, and our outstanding customer service has made us the valley's most recommended company by homeowners like yourself. 

What is an Anode Rod

Water heaters are a necessary part of any home. They ensure that you have hot water for bathing, cleaning, and other purposes. Unfortunately, most Phoenix homeowners wait until their water heater breaks down to have it replaced. This can be a costly mistake.

The average durability of a water heater is around eight to 12 years. An old water heater that is not adequately maintained can break down at any time and stop producing hot water. If not rectified, it can leave you with no hot water or, worse, with water damage.

It's therefore essential to ensure you have a water heater installation professional in Phoenix to install your brand new water heater unit. Our licensed technicians at

 can help you choose the best model for your needs and install it quickly and efficiently.

Types of Water Heaters We Install & Service

Water heaters come in different types to cater to different needs and budgets. Unlike other water heater installation companies in Phoenix, our company offers comprehensive services for all kinds and brands of water heaters available in the market. And we provide not only water heater installation but also different dedicated services for them, including repairs, maintenance, and water heater replacement.

 - These are very common water heaters in most homes and businesses in Phoenix, though there are some parts of the valley that do not have gas. They are relatively

to buy and install, store up to 50 gallons of water, and use natural gas to heat water. When properly serviced and maintained, they last between eight to 12 years.

 - They are electric-powered and heat water faster than gas heaters. They pack a high energy efficiency feature and are an excellent choice to save energy in the long run.

 – They come with a manufacturer life time tank warranty.  Although these are technically electric heaters, they don't have anode rods. An anode rod attracts corrosive elements and sediments in the water to avoid corroding the inside of your water heater tank. These heaters are easier to take care of since they require less maintenance, unlike traditional electric heaters. They also prevent the metallic smell of water and last longer.

 are best suited when several people in your household use kitchen systems and bathrooms simultaneously. They are easily stored and instantly provide an endless flow of hot water whenever you need it. So, you can take a shower while someone else is cooking without any interruption.

The hot water in your home is essential in helping you clean, cook, shower, and relax. When your traditional, electric, or gas water heater starts to fail, the team at Moon Valley Plumbing can help. We understand that a broken water heater can be frustrating and inconvenient.

This is why we offer 24/7 emergency services to get your family back to having hot water anytime, anywhere. Our expert plumbers provide several traditional water heaters services, including water heater installation service, water heater replacement, and routine maintenance and water heater repair service. We ensure we offer swift, precise, and streamlined services.

Tankless water heaters are energy-efficient and perfect when you need hot water on-demand. However, tankless water heaters need regular maintenance to ensure consistent and efficient performance.

Our experienced plumbers at Moon Valley Plumbing are trained in installing and maintaining tankless water heater systems. They can evaluate your needs and make recommendations based upon your household size and demand. They also provide tankless water heater replacement services to ensure your family can continue experiencing endless hot water on demand.

What's the Difference Between a Traditional Tank Water Heater & a Tankless Water Heater in Phoenix, AZ?

The main difference between a traditional tank water heater and a tankless water heater is the availability of hot water. A traditional tank water heater holds gallons of water, so hot water is readily available. A tankless water heater heats water on-demand, significantly reducing your energy costs over time. They also take up small space, and can be a nice upgrade to your home. Talk to one of our plumbing experts to see if a tankless water heater makes sense for your home.

What Size Tankless Water Heater Does Your Home Need?

A tankless-style water heater unit is measured in gallons per minute in relation to the on-demand flow rate. This ranges from four to eight gallons per minute. The bigger the tank, the more expensive the individual unit and heating costs. Let the plumbing experts at Moon Valley Plumbing help you choose the best water heater for your home, with an installation and cost estimate today.

Water Heater Installation & Service in Phoenix

Water heaters are a must-have in your Phoenix home. If you are looking for efficient Phoenix water heater services and plumbing services, trust the professionals at Moon Valley Plumbing. Our team of water heater experts has been providing quality customer service and quick turnaround for over two decades.

We offer comprehensive services for all kinds of water heaters available in the market today, including traditional gas heating, electric heating, and tankless units with guaranteed customer satisfaction. 

 today to help you choose the most suitable water heater. We will also provide an installation and cost estimate.

Water Heater Installation

Plumbing problems don't always present themselves immediately. In some cases, they can even go unnoticed until they become serious. Call a licensed plumber immediately if you notice any signs of a leak or other issues in your home's water system, do not attempt to fix them on your own. 

It has been estimated that over half of American homes have at least one plumbing issue. The good news is that these issues usually aren't too complicated. For homeowners who know what to look out for, many common plumbing repairs can be done quickly.

However, it is essential to note that many plumbing issues require professional attention.

Compliance is an integral part of any significant plumbing work. Regulations are typically set aside to ensure plumbers or anyone with plumbing expertise operates safely and reduces the risks to the environment and the entire plumbing system.

Additionally, plumbing codes are put in place to provide legal backing in case of sloppy workmanship or if claims arise because of an issue. For example, in accidents due to poor plumbing, the authorities can make informed legal decisions based on the existing plumbing codes.

Without plumbing expertise or certification, it is easy to violate a plumbing code. A simple unintentional mistake can lead to a chain of events that affects the entire municipal plumbing system.

This exposes you to fines and possible stringent measures. A well-trained and certified plumber understands every plumbing code and will ensure every service they provide is fully compliant with existing plumbing codes.

DIY plumbing mistakes can be costly. If you try to fix a leaking pipe and break it accidentally, you can cause water damage to your home. Depending on the magnitude, water damage can be costly, especially when it comes to restoration and mitigation.

Spending much more on water damage repairs is easy when attempting DIY plumbing. Therefore, ensure you surrender any plumbing work to a professional who understands plumbing systems and how to avoid possible water damage during repairs.

A typical plumbing repair job requires various tools and precisely-measured plumbing parts such as water pipes. It is crucial that when fixing pipes and plumbing systems, you should match everything according to specifications.

Using the wrong-sized valve or connector can lead to a pressure buildup and pipe leaks. Water leaks can be hazardous, especially if you have electrical appliances or connections near these leaks. Moreover, burst pipes can cause internal flooding, which is dangerous if you have pets or children at home.

Without any notable expertise or experience, DIY plumbing has almost no objective. On the other hand, a plumber has years of training and experience and is certified to perform any plumbing service. A plumber is skilled in handling any plumbing issue, whether small or large.

Besides having the technical know-how, a plumber is mostly equipped with specialized tools for a complex plumbing project. Usage of such tools requires additional training for safety and efficiency. Since a "DIY plumber" usually lacks in most of the above requirements, they won't fulfill the intended long-term fix. 

Knowledge and skills are elemental for any project of any magnitude. On the one hand, DIY plumbing can save you money while giving you some form of satisfaction. On the other hand, DIY plumbing can worsen the damage and cost you a lot more in repairs.

Hiring a professional plumber can cost variable amounts of money. However, for such an investment, you are securing your safety and the integrity of your plumbing system. In addition, hiring a plumber saves you time since a plumber knows what to look for and diagnose in a plumbing system.

Hire An Expert Plumber in Phoenix Arizona

Moon Valley Plumbing is a reputable plumbing company that provides service to home and business owners in Phoenix, AZ. With our professional services, you can avoid the harsh consequences of DIY plumbing. We provide emergency repair services using state-of-the-art advanced technology.

 to schedule plumbing repair services in Phoenix, Arizona.

DIY Plumbing Mistakes: Why You Shouldn't Do Your Own Plumbing

How often have you gotten home craving a long warm shower but couldn't enjoy it because the water pressure was too low? For most water appliances in our homes, water pressure makes all the difference. Extremely high-pressure or low-pressure can bring issues, particularly regarding the safety and the lifespan of your plumbing system and appliances.

Understanding how a pressure reducing valve works makes all the difference when dealing with any plumbing concern. Attempting to DIY a plumbing problem can result in more dreadful and costly 

. If you are within Phoenix, Arizona, and need residential or commercial plumbing and rooting services, 

Before narrowing down to how a pressure reducing valve works, understanding what it is, the key components, and the function is critical.

A pressure reducing valve is a self-operating, hydraulic control valve designed in a way that regulates the force of water to the necessitated value. Regardless of the differences between inlet and outlet water pressure, a pressure reducing valve responds instantly to function with the varying demand.

Today, most plumbing systems have a preinstalled pressure reducing valve; however, after about ten years of using the pressure reducing valve, it's recommended to have it replaced.

Main components of a pressure reducing valve

The pressure reducing valve is made up of different components to meet the ultimate function of maintaining a steady upstream and downstream pressure. These include:

 – The valve's body accommodates an internal V port plug that helps give a stable and accurate response for pressure regulation and flow return.

 – This is often understood as the valve's brain. The pilot regulator is meant to shape the inflow and outflow of water between the control chamber of the pressure reducing valve.

 – Before water gets into the hydraulic parts, it's filtered in the control filter to increase the reliability of the control valve. Also, it offers opportunities for minimum maintenance.

With the control valve in its closed position and the adjusting screw uncalibrated, upstream water pressure begins to flow in the diaphragm, and no force is available yet to push the open valve.

As the upstream pressure gets into the drip after passing through the filter, the water supply regulator reduces the pressure moving it into the pilot, where a pilot plug blocks flow. When the adjusting screw is calibrated, the supply pressure fills the control valve, opening the valve to give upstream pressure.

Primarily, the pressure in the pilot guides the valve on the right course of action. Immediately pressure is vented, the pilot diaphragm decompresses, and the pressure supply recycles.

Under proper water pressure calibration and consistent water flow, the pressure reducing valve should open and close by small percentages to guarantee adherence to the set point. In automatically regulated pressure reducing valves, they work with the help of a sensor line protector that controls pressurization.

How do you check the water pressure in your plumbing system?

If you think that the plumbing system in your premises could be having an issue, checking the water pressure could likely give you clues about the actual problem.

So, how do you check the water pressure? It's as easy as opening the spigot on the pressure gauge on one of the pipes. The gauges you see when you open the tap indicate everything about your house's water pressure. You can source these pressure gauges in Phoenix at almost any hardware or through Moon Valley Plumbing.

Alternatively, you can use a smart water security system to monitor water pressure and detect any possible plumbing issues in real-time. To learn more about this technology and how such plumbing fixtures can monitor your water pressure within Phoenix, reach out to the 

Imagine getting home to a flooded house because of a leak? It is fundamental to maintain the recommended water pressure, whether it's a water pipe, appliance, or fixture.

Usually, each of these products is designed to withstand water pressure to certain limits, usually between 60 to 80 psi. When any of the water lines, pipes, water heaters, and faucets are exposed to high water pressure, they wear down faster than expected.

Get Help from the Plumbing Experts at Moon Valley Plumbing

Low or high water pressure can be a nuisance compared to regular running water. If you are experiencing commercial or residential plumbing and rooting problems in Phoenix, Moon Valley Plumbing would be glad to help.  24-hour emergency services available.

Plumbing services we can help you with include water heater installation, water line, cooler leaks, pipe and drain repair, and cleaning, just to name a few. Regardless of the complexity of your plumbing problems, 

 today, and let us sort out the plumbing system for you.

How Does a Pressure Reducing Valve Work? 

Clogging is a significant problem in residential and commercial developments as it creates severe issues in the sewer system. Clogs in your sewer lines can create enough pressure to cause 

 in your drain lines. You need to contact professional plumbing services when you notice any issue with your drain lines. 

, we offer honest, high-quality, and professional plumbing services in Arizona. We also provide high-grade sewer cleaning tools in Phoenix. 

 to guide us on the equipment to carry for the plumbing job. We mainly enquire about the type of drain and the type of clog.

At Moon Valley Plumbing, we use a 3/8 cable for clearing a slow-draining tub or clogs in tubs and showers. If the clog cannot be reached through the overflow and drain, we will go on the roof and cable through the roof vent.

The closet auger is the appropriate tool for clearing a stoppage in a toilet. It has a spring that makes it flexible to go through the tight bend in a bowl. We use a telescoping auger for clogs beyond the bowl. We use the urinal auger for urinals as it can go through tight bends.

We recommend using handheld models with ¼, 5/16, or 3/8 inch cables as they are suitable for clearing all small diameter drain lines. 

There are wide varieties of machines you can use to clear small floor drains with added features. The most suitable tool for unblocking 2-4 inch drain lines is that with a 3/8 or ½-inch cable. 

We use heavy-duty sewer cleaning tools with large diameters and strong cables, as they produce enough torque to clear tough clogs and cut through tree roots. The major machines we use to clear floor drains and mainlines include sectional drain cleaning and drum-type drain cleaning machines. We use a picote machine on cast iron to clean out most of the scaling and build-up.

We use cable machines and attach other retrieving tools when removing foreign objects such as toys and broken cables, causing stoppage on your drain lines.

We use water jets to clear grease clogs in residential homes and restaurants. Water jets use high-pressure water to knock and flush away grease stoppages. They also clear sand, and mud clog on metal and plastic drain lines.

Soap, hair, and scales are the common causes of debris blockages. We use cable drain cleaners to clear debris in residential homes.

Major Types of Sewer Cables and Drain Snakes

We ensure to select the correct size and type of sewer cable to remove drain clogs successfully. Good drain sewer cleaning cables are flexible and strong to generate enough torque. Some of the 

Always choose the correct sewer cleaning tools, and ask the right questions before starting a plumbing and rooting job. This is important as it helps you do the job quickly, easily saving your client unnecessary expenses. 

Always choose Moon Valley Plumbing since we are licensed, insured, clean, professional, and highly affordable. 